Slinet S1.5
The next generation for innovative coil processing.
Markets are subject to permanent change.
In sheet metal forming, this also leads to an ever higher complexity of products and processes. The efficient production of blanks for profiles and flashings requires effective, high flexible and user friendly solutions.
Slinet combines best quality with easy use with highest flexibility and automation.
The modular system contains out of 3 modules with can be added flexible to the required setting. The cut to length unit SLINET SI 1.5 allows precise cuttings with lowest set up time. With its full automated up to 8 knife setting the SLINET Si1.5 allows an automated adjustment for slitting. The cross cut is made by a new innovative roll knife. The system can be added by the automated 4 roll straightening unit. The next module which can be added is the full automated coil storage system.
AUTOMATED KNIFE ADJUSTMENT
With it is up to 8 knife automated knife adjustment the production of blanks for profiles and flashings can be made fast and easy without manual knife adjustment.
CLAMPING SYSTEM
Thanks of the innovative clamping system the knifes can be locked and positioned perfectly
OPTIONAL BRICK CUTTING
The optional brick cutting allows the optimal setting of orders within the coil by having minimum waste strips.
CROSS CUT
The cross cut is made by a roll knife. This cut will not be made from the top as usual. The industry innovation of SLINET allows the cross cut from bottom up. This innovation eliminates scratches which occurs during material handling as the small grade goes up not down.
STRAIGHTENING UNIT
The automated straightening unit can be ordered optional. Done by 4 rolls this unit can switch between convex and concave automated.
Technical informations
| Maximum bandwidth | 1.250 mm |
| Cutting capacity | |
| Steel 400 N/mm² | 0,4 – 1,00 mm |
| Stainless steel 550 N/mm² | 0,4 – 0,8 mm |
| Alu 190 N/mm² / copper | 0,5 – 1,25 mm |
| Minimal bandwidth | 60 mm |
| Cutting accuracy | Klasse „m“ DIN/ISO 2768 (± 0,8 mm/m) |
| Cutting gap adjustment | 0 – 0,75 mm |
| Longitudinal division | up to 8 roller knives |
| Transverse cutting | Roller cutter |
| Electrics | 3 PH 400-480V AC/PE |
| Compressed air | 100 Liter/min , 6 Bar |
| Dimension L x W x H | 9000 x 2300 x 2000 mm |
SLINET- VIDEOS
Slinet Pro Touch
The SLINET Pro Touch combines efficiency and user-friendliness in an unprecedented
relationship. The control which comes in standard stands for its userfriendliness
and a clear structure.
- Model S1.5
-
Slinet S1.5
The next generation for innovative coil processing.
Markets are subject to permanent change.
In sheet metal forming, this also leads to an ever higher complexity of products and processes. The efficient production of blanks for profiles and flashings requires effective, high flexible and user friendly solutions.
Slinet combines best quality with easy use with highest flexibility and automation.
The modular system contains out of 3 modules with can be added flexible to the required setting. The cut to length unit SLINET SI 1.5 allows precise cuttings with lowest set up time. With its full automated up to 8 knife setting the SLINET Si1.5 allows an automated adjustment for slitting. The cross cut is made by a new innovative roll knife. The system can be added by the automated 4 roll straightening unit. The next module which can be added is the full automated coil storage system.
AUTOMATED KNIFE ADJUSTMENT
With it is up to 8 knife automated knife adjustment the production of blanks for profiles and flashings can be made fast and easy without manual knife adjustment.
CLAMPING SYSTEM
Thanks of the innovative clamping system the knifes can be locked and positioned perfectly
OPTIONAL BRICK CUTTING
The optional brick cutting allows the optimal setting of orders within the coil by having minimum waste strips.
CROSS CUT
The cross cut is made by a roll knife. This cut will not be made from the top as usual. The industry innovation of SLINET allows the cross cut from bottom up. This innovation eliminates scratches which occurs during material handling as the small grade goes up not down.
STRAIGHTENING UNIT
The automated straightening unit can be ordered optional. Done by 4 rolls this unit can switch between convex and concave automated.
- Technical Data
-
Technical informations
Maximum bandwidth 1.250 mm Cutting capacity Steel 400 N/mm² 0,4 – 1,00 mm Stainless steel 550 N/mm² 0,4 – 0,8 mm Alu 190 N/mm² / copper 0,5 – 1,25 mm Minimal bandwidth 60 mm Cutting accuracy Klasse „m“ DIN/ISO 2768 (± 0,8 mm/m) Cutting gap adjustment 0 – 0,75 mm Longitudinal division up to 8 roller knives Transverse cutting Roller cutter Electrics 3 PH 400-480V AC/PE Compressed air 100 Liter/min , 6 Bar Dimension L x W x H 9000 x 2300 x 2000 mm - Videos
-
SLINET- VIDEOS
- Software
-
Slinet Pro Touch
The SLINET Pro Touch combines efficiency and user-friendliness in an unprecedented
relationship. The control which comes in standard stands for its userfriendliness
and a clear structure. - Downloads