HOLECUT PROFESSIONAL HC 60

The Professional Line punching machines by EHRT are characterized
by their outstanding robustness even under high loads. Running a three-shift operation, for example, is not an issue.

The Punching Machine Professional Series is fitted with three CNC-controlled axes, allowing for production parts to be made with virtually perfect accuracy. No additional employees are needed to adjust the machine, which saves a significant amount of time. The operator is only responsible for starting the machine, feeding in the material, and then removing the production parts. Through additional options, however, the processes of feeding the material and removing the production parts can be further automated. This makes the machines extremely cost-effective.

EHRT‘s software solutions enable a customized and smooth production flow of the Professional Line. In addition, the punching machines can be optimally linked with the bending machines so that production can be carried out based on a single production file from a shared database. The PLC machine controller by Beckhoff enables machine maintenance and software updates via remote access.

In the Professional Line, each tool station is configured by default to either employ one Maxi Tool or one MultiTool 6in1. EHRT’s tool system allows for simple and fast tool changes, thereby minimizing setup times. When using MultiTools 6in1, the machine can be fitted with 42 punches plus a cutting tool.

With Professional machines, up to 2 SingleTaps (thread formers) can be used.

The HC 60 is fitted with a hydraulic cylinder with a force of 560 kN. With Professional series machines, it is possible to punch material that is 15-254 mm (0.6-10“) wide and 3-20 mm (0.1-0.8“) thick.

During processing, the workpieces are clamped laterally by a clamp in order to minimize any damage to the workpiece. Furthermore, due to the special clamp, punching can be carried out over the entire workpiece.

The tools are fitted with particularly strong springs which provide high retraction forces. Thus, small cutting clearances can be produced even with thick metal bars. Afterward or during production, it is possible to label the workpieces with different systems. This can be used for additional production steps as well as for your customers’ specifications.

More information can be found in the product datasheet HC 60 Professional