Compact machine for producing double standing seam profiles 25 from blanks, cut lengths or directly from the coil with digital length measuring device with a scale in millimeters, a driven belt feeder and a motorized roller shear to execute cross-cuts.
Profilabmessungen
Roller blades before profile shaping
Control panel
FEATURES
- Compact version
- Motorized roller shear to perform automated cross-cuts ahead of profile shaping
- Control via touch panel
- Digital length measurement with millimetre precision
- Roller blades LS to perform longitudinal cuts of parallel fitting panels ahead of profile shaping
- Special control with touch for convenient entry of lengths and quantities
- Parallel sheet metal is produced in a single work cycle
- Minimum panel length 400 mm (depending on the material)
- Continuous width adjustment 240 – 800 mm
- Tapered, conical or fitting panels in 2 work cycles
- Smallest axial dimension 80 mm when producing single-sided profiles
- Movable on 4 castors
VIDEO
TECHNICAL INFORMATION
| Supply voltage | 230 V / 50 Hz / 1 Ph. |
| Drive power | 1.1 kW |
| Operating speed | 8.5 m/min |
| Forming stages | 7 stations |
| Shortest panel length | 500 mm |
| Infeed width | 240 – 800 mm |
| Axial dimension | approx. 160 – 730 mm (depending on the material) |
| Infeed height | 870 mm |
| Processable materials | Titanium zinc up to 0.8 mm Copper up to 0.8 mm Aluminium up to 0.8 mm Sheet steel (galvanized and coated) up to 0.7 mm Stainless steel up to 0.5 mm |
| Dimensions (L x W x H) | 1,670 mm x 1,395 mm x 1,180 mm |
| Weight | 400 kg |
ACCESSORIES
GUIDEBOY
Additional material guide for single-sided profile shaping of panels. The installation of the guideboy on any of the Schlebach profile shaping machine infeed guides requires little effort.The Guideboy prevents the sheet material from shifting towards the centre of the machine during single-sided profile shaping operations. The required lateral force across the profiling direction may be adjusted by means of the directional angle, as well as an increase of the contact pressure on the sheet metal.Damage to the material surface is ruled out by the use of high quality pressure rollers with a special rubber coating.RIBBING ATTACHMENT 25 MM
Ribbing attachment assembly to shape longitudinal ribs with a width of 25 mm and a depth of approximately 1.1 mm into the visible surface of profiled panels. The ribbing attachment assembly consists of a guide unit, upper and lower ribbing rollers with brackets.
The ribbing attachment assemblies are equipped with high-quality ribbing rollers on ball-bearings to ensure maximum protection of the surface from the panels being profiled. The ribbing attachments are continuously adjustable across the profile shaping direction to ensure that the distance of the ribs that are pressed into the panels may be designed as required.
Note: The profiling of ribs is not possible on conical shapes.
DECOILER TRANS-ASPO
The TRANS-ASPO uncoiler is for fast and simple holding of 1t coils. Due to the flying bearing and the manual height adjustment, the coil can be placed on the tensioning mandrel and tensioned manually without additional lifting equipment. The uncoiler is equipped with four travel rollers (two of which with fixing brake), and can therefore be placed easily in front of the working machine.
PROFILE INFORMATION
DIMENSIONS STANDING SEAM 25
a) Axial Dimension
The corresponding strip widths result in the following profile dimension for the profile height 25
b) Covering Width
During installation, the resulting covering widths must be considered
c) Variants
The following profiles can be manufactured on the machine
SYSTEM DESCRIPTION
Schlebach machines are characterized by the highest precision and user-friendliness. Get to know the folding techniques and backgrounds of the processing of metal.
LAYING
Learn more about laying finished sheets with a Schlebach machine.
- Technical Information
-
TECHNICAL INFORMATION
Supply voltage 230 V / 50 Hz / 1 Ph. Drive power 1.1 kW Operating speed 8.5 m/min Forming stages 7 stations Shortest panel length 500 mm Infeed width 240 – 800 mm Axial dimension approx. 160 – 730 mm (depending on the material) Infeed height 870 mm Processable materials Titanium zinc up to 0.8 mm
Copper up to 0.8 mm
Aluminium up to 0.8 mm
Sheet steel (galvanized and coated) up to 0.7 mm
Stainless steel up to 0.5 mmDimensions (L x W x H) 1,670 mm x 1,395 mm x 1,180 mm Weight 400 kg - Accessories
-
ACCESSORIES
GUIDEBOY
Additional material guide for single-sided profile shaping of panels. The installation of the guideboy on any of the Schlebach profile shaping machine infeed guides requires little effort.The Guideboy prevents the sheet material from shifting towards the centre of the machine during single-sided profile shaping operations. The required lateral force across the profiling direction may be adjusted by means of the directional angle, as well as an increase of the contact pressure on the sheet metal.Damage to the material surface is ruled out by the use of high quality pressure rollers with a special rubber coating.RIBBING ATTACHMENT 25 MM
Ribbing attachment assembly to shape longitudinal ribs with a width of 25 mm and a depth of approximately 1.1 mm into the visible surface of profiled panels. The ribbing attachment assembly consists of a guide unit, upper and lower ribbing rollers with brackets.
The ribbing attachment assemblies are equipped with high-quality ribbing rollers on ball-bearings to ensure maximum protection of the surface from the panels being profiled. The ribbing attachments are continuously adjustable across the profile shaping direction to ensure that the distance of the ribs that are pressed into the panels may be designed as required.
Note: The profiling of ribs is not possible on conical shapes.
DECOILER TRANS-ASPO
The TRANS-ASPO uncoiler is for fast and simple holding of 1t coils. Due to the flying bearing and the manual height adjustment, the coil can be placed on the tensioning mandrel and tensioned manually without additional lifting equipment. The uncoiler is equipped with four travel rollers (two of which with fixing brake), and can therefore be placed easily in front of the working machine.
- Profile Information
-
PROFILE INFORMATION
DIMENSIONS STANDING SEAM 25
a) Axial Dimension
The corresponding strip widths result in the following profile dimension for the profile height 25
b) Covering Width
During installation, the resulting covering widths must be considered
c) Variants
The following profiles can be manufactured on the machine
SYSTEM DESCRIPTION
Schlebach machines are characterized by the highest precision and user-friendliness. Get to know the folding techniques and backgrounds of the processing of metal.
LAYING
Learn more about laying finished sheets with a Schlebach machine.
MORE PRODUCTS AND SOLUTIONS
Profiling machine EPM-25
Our EPM-25 profiling machine – For double lock standing seam profile 25 and one-sided profiling in two operations
Profiling machine MINI-LIGHT
Our profiling machine MINI-LIGHT – For the production of double lock standing seam profile 25 from blanks or sheet material in one pass
Profiling machine MINI-PROF
Our profiling machine MINI-PROF PLUS – Compact machine for the production of double lock standing seam profile 25 from blanks, from sheet material or directly from coil
Profiling machine MINI-PROF PLUS
Our profiling machine MINI-PROF PLUS – Compact machine for the production of double lock standing seam profile 25 from blanks, from sheet material or directly from coil