Schlebach EPM 25 Profiling Machine

Description

The purpose of profiling machine EPM-25 is
to produce double standing seam profiles
25 from blanks or cut lengths in two passes.
It is designed as a universal machine for the
entry-level users or as a backup machine for
onsite work.
A single sided run can produce conical,
oblique panels or standing seam sheets
from a centre to centre distance of 50 mm.
The length of the shortest panel is approx.
300 mm. The production rate is approx.
11 metres per minute.
The profile shapers drive is turned on at the
main switch and the blanks or cut lengths
with a running drive manually and separately
in two passes, one for each side of the profile.
The profiling unit (tie-bars) with 7 shaping
levels are supplied on a torsion-proof steel
frame. The strip or sheet material is guided
by lateral infeed guides on ball-bearings on
the fixed as well as the adjustable side. These
are adjustable to set the outer edges of the
profile.

The profile rollers are made of high quality
special steel and surface treated. This special
treatment provides the rollers with a high
level of corrosion and wear protection. The
bearings of the upper profile rollers are have
resilient mounts to allow them to adapt to
the material thickness. This ensures that impression-free and low-wear production of
the panels.
It is easily moved and quickly set up due to
its low weight and the use of plug-in carrying
handles. This ensures a wide range of applications for the machine during operations
and on the construction site.

Technical Data
Gauges: Non-ferrous metals up to 0.8 mm
Steel: up to 0.7 mm
Stainless Steel: up to a gauge of 0.5 mm
Width adjustment: 230 – 850 mm in the infeed
160 – 780 mm axial dimensions
Dimensions: LX W x H 1.200 x 1.400 X 850 – 1.050 mm
Infeed Height: 670 – 870 mm infinitely adjustable
Weight: approx. 220kg
Feed Rate: app. 11 m/min.
Drive: 1,1 kW, 400 Volt, 3-ph.,
optionally available: 230 Volt, 1-ph.