Round arch curving machine

Robust round arch curving machine for convex bending of pre-profiled panels for use as dormers, round arches, domes or barrel-vault roofs with and without clip relief in the heights 25, 32 or 38 mm.opied or exported by a simple touch.

  • Tailored to the double standing seam of the Schlebach profile shaping machines
  • Adjustable contact pressure, depending on the radii
  • Seamless production of changing radii in a panel
  • Seperately powered bending units for the female and male profile side
  • Panels with male profile on both sides in one work cycle
  • Conical and tapered panels or panels with female profile on both sides can be produced in multiple passes
  • Width adjustment using handwheel
  • Printed table shows necessary contact pressure
  • Working speed continuously variable from 0 to 12 m/min
  • Optionally also for profile heights 32  and 38 mm by exchanging bending rollers
  • Large number of possible shapes:

Supply voltage 230 V / 50 Hz / 1 Ph.
Drive power 1.1 kW
Operating speed max. 12 m/min, adjustable
max. 12 m/min, adjustable
Axial dimension 300 – 810 mm
Smallest radii
Non-ferrous metals
Steel
Stainless stee		 from radius 600 mm
from radius 1,500 mm
from radius 1,500 mm
Processable materials
Non-ferrous metals
Steel
Stainless steel		 max. 0.8 mm
max. 0.7 mm
max. 0.5 mm
Dimensions (L x W x H) 1,000 mm x 1,000 mm x 1,700 mm
Weight 230 kg
Round arch curving machine

Round arch curving machine

Robust round arch curving machine for convex bending of pre-profiled panels for use as dormers, round arches, domes or barrel-vault roofs with and without clip relief in the heights 25, 32 or 38 mm.opied or exported by a simple touch.

  • Tailored to the double standing seam of the Schlebach profile shaping machines
  • Adjustable contact pressure, depending on the radii
  • Seamless production of changing radii in a panel
  • Seperately powered bending units for the female and male profile side
  • Panels with male profile on both sides in one work cycle
  • Conical and tapered panels or panels with female profile on both sides can be produced in multiple passes
  • Width adjustment using handwheel
  • Printed table shows necessary contact pressure
  • Working speed continuously variable from 0 to 12 m/min
  • Optionally also for profile heights 32  and 38 mm by exchanging bending rollers
  • Large number of possible shapes:

Technical Data
Supply voltage 230 V / 50 Hz / 1 Ph.
Drive power 1.1 kW
Operating speed max. 12 m/min, adjustable
max. 12 m/min, adjustable
Axial dimension 300 – 810 mm
Smallest radii
Non-ferrous metals
Steel
Stainless stee		 from radius 600 mm
from radius 1,500 mm
from radius 1,500 mm
Processable materials
Non-ferrous metals
Steel
Stainless steel		 max. 0.8 mm
max. 0.7 mm
max. 0.5 mm
Dimensions (L x W x H) 1,000 mm x 1,000 mm x 1,700 mm
Weight 230 kg