Electrohydraulic notching unit for automated notching, feeding-forward and folding-back of pre-profiled panels with double standing seam 25, 32 and 38 mm with and without clip relief for roofs, dormers, façades and parapets.
FEATURES
- Processes standard profiles as well as profiles with clip relief
- Notching, feeding forward and folding-back in three series-connected operations
- Production of round cutouts
- Prepares for bottom and top seam ends on roofs, dormers, façades and parapets
- Eaves and roof inflexion points, channels, monopitch roofs, façade bases, faceplates, verge flashing and window lintels
- Pre-profiled parallel panels are produced in three series-connected operations
- Conical or tapered shaped panels are produced in four series-connected operations alternately
- Equipped with segment rails in the upper beam, bending beam and the supporting table
- Various edging work, e.g. on rhombic plates and shingles quickly and efficiently
- Suitable for mirrored covering and coffered roof slabs
VIDEO
TECHNICAL INFORMATION
| Supply voltage | 400 V / 50 Hz / 3 Ph. |
| Drive power | 1.1 kW |
| Working width | 300 – 800 mm (infinitely variable) |
| Notching depth | 0 – 80 mm (infinitely variable) |
| Fold-over length | 15 – 40 mm (infinitely variable) |
| Edging angle | 0 – 170° (infinitely variable) |
| Processable materials | Titanium zinc up to 0.8 mm Copper up to 0.8 mm Aluminium up to 0.8 mm Sheet steel (galvanized and coated) up to 0.7 mm Stainless steel up to 0.5 mm |
| Dimensions (L x W x H) | 1,650 mm x 1,500 mm x 1,200 mm |
| Weight | 590 kg |
PROFILE INFORMATION
FUNCTIONS
1. NOTCHING
On the shown profile drawing, the right and left profiling area get notched. The notching depth is infinitely variable between 0 – 80 mm.
2. FEEDING FORWARD
The shown and notched profile can be produced on the female side with a expanding tool.
3. EDGING
In addition to the required edging for the eaves more different versions can also can be performed (see example).
EXAMPLE:
RHOMBIC PLATE PRODUCTION
By using special supporting tables, the edging of rhombic plates is possible in different geometries. Please contact us regarding specific usage.
- Technical Information
-
TECHNICAL INFORMATION
Supply voltage 400 V / 50 Hz / 3 Ph. Drive power 1.1 kW Working width 300 – 800 mm (infinitely variable) Notching depth 0 – 80 mm (infinitely variable) Fold-over length 15 – 40 mm (infinitely variable) Edging angle 0 – 170° (infinitely variable) Processable materials Titanium zinc up to 0.8 mm
Copper up to 0.8 mm
Aluminium up to 0.8 mm
Sheet steel (galvanized and coated) up to 0.7 mm
Stainless steel up to 0.5 mmDimensions (L x W x H) 1,650 mm x 1,500 mm x 1,200 mm Weight 590 kg - Profile Information
-
PROFILE INFORMATION
- Functions
-
FUNCTIONS
1. NOTCHING
On the shown profile drawing, the right and left profiling area get notched. The notching depth is infinitely variable between 0 – 80 mm.
2. FEEDING FORWARD
The shown and notched profile can be produced on the female side with a expanding tool.
3. EDGING
In addition to the required edging for the eaves more different versions can also can be performed (see example).
EXAMPLE:
RHOMBIC PLATE PRODUCTION
By using special supporting tables, the edging of rhombic plates is possible in different geometries. Please contact us regarding specific usage.
MORE PRODUCTS AND SOLUTIONS
Nochting unit KLS
Our notching unit KLS – For mechanical assembly preparation of pre-profiled panels
Notching unit KLS 90
Our notching unit KLS 90 – For mechanical assembly preparation of pre-profiled panels
Bending unit UKST
Our UKST bending station – for flange mounting on profiling machines of the QUADRO series
