Slitting and cross-cutting machine for precise, burr-free and flexible processing of wide strip material.
Liftable feed table and extraction table shown in images above
Image shows feed table (liftable) and run-out table
Touch panel PLC
FEATURES
- High-efficiency slitting and cross-cutting system with guillotine shear and integrated straightener for wide strips of 1,250 mm or 1,500 mm
- Continuously adjustable run-in width from 200 mm to 1,250 mm (or 1,500 mm)
- Handles material thicknesses up to 2 mm (depending on material and number of cuts)
- Intuitive PLC control system with a 7″ touch panel for user-friendly operation
- Equipped with 6 hard chrome-plated straightening rolls; lower 3 rolls are driven
- Upper 3 straightening rolls can be automatically lifted for setup or stopping during cutting
- Robust support for both upper and lower straightening rolls ensures stability and precision
- Maximum feed rate of 28 m/min, adjustable via frequency converter
- Gentle material infeed using specially coated feed rolls
- Quick clamping system ensures safe and damage-free blade handling
- Blade shafts fitted with 5 pairs of knives, usable and regrindable on both sides
- Option to upgrade to 10 knife pairs (with reduced cutting capacity)
- Adjustable support for both upper and lower blade shafts
- Precise blade positioning via integrated scale with millimetre accuracy
- Blade shafts with a diameter of 100 mm
- Automatic raising of the upper shaft for optimized waste handling and cross-cutting mode
- Unified base frame for both cross-cutting system and guillotine shear
- Integrated forklift pockets for safe and easy machine transport
TECHNICAL INFORMATION
| SLMST MASTERCUT 1250 | SLMST MASTERCUT 1500 | |
| Supply voltage | 400 V / 50 Hz / 3 Ph. | 400 V / 50 Hz / 3 Ph. |
| Drive power | 3.0 kW | 3.0 kW |
| Strip run-in width | 200 – 1,250 mm | 200 – 1,500 mm |
| Working speed | max. 22 m/min, adjustable | max. 22 m/min, adjustable |
| Length tolerance | ± 0.5 mm (1,000 mm) | ± 0.5 mm (1,000 mm) |
| Number of blade pairs | Default: 5 Optional up to 10 (depending on the material) |
Default: 5 Optional up to 10 (depending on the material) |
| Processable materials Sheet steel (400 N/mm²) Stainless steel (700 N/mm²) Copper / Zinc Aluminium |
max. 1.5 mm (5 blade pairs) max. 1.25 mm (4 blade pairs) max. 1.5 mm (5 blade pairs) max. 1.5 mm (5 blade pairs) |
max. 1.5 mm (5 blade pairs) max. 1.25 mm (4 blade pairs) max. 2.0 mm (5 blade pairs) max. 2.0 mm (5 blade pairs) |
| Dimensions (L x W x H) | 3,580 mm x 2,000 mm x 1,560 mm | 3,580 mm x 2,300 mm x 1,560 mm |
| Weight | approx. 4,000 kg | approx. 4,800 kg |
ACCESSORIES
RIGHT OPERATING SIDE SLMST MASTERCUT 1250 / 1500
Alternatively, the machine can be changed to be controlled from the right side (default operator side is left).
ADDITIONAL PAIRED BLADES
Additional cutting rings: The standard set of 4 paired blades can be extended to a max. of 10 pairs of blades (depending on material).
DOUBLE GUIDE ROLLER TO FEED THE MATERIAL GENTLY
A pair of guide rollers can be installed in front of the intake to feed material to the slitting machine. This can prevents damage to the material (e.g., bending of the strip material).
PROTECTIVE FOIL COATER SFB (NOT DRIVEN)
The protective film extention unit is designed to unwind a self-adhesive protective film while applying it to the top surface of material while being processed.
FEED TABLE (LIFTABLE)
Support table for inconvenient material. The stainless steel platform can be lifted (pneumatically with 8 bar working pressure) and is controlled by the central PLC unit of the system.
Extraction TABLE
Stainless steel table surface for receiving panels after cutting. Four heavy duty castors (two with lock breaks) ensureing high stability while manoeuvring the cut material around the workshop. Mechanic swivelling hooks are used to attach the table to the machine while magnetic safety switches verify the correct position of it.
DECOILER AH1250A1 (ONLY MULTICUT 1250)
A robust decoiler designed for metal coils with a maximum weight of 1,000 kg and a maximum coil width of 1,250 mm.
- Durable Construction: Built with a welded frame for stability.
- Adjustable Mandrel: Continuously adjustable ball-bearing-mounted mandrel with centre adjustment.
- Flexible Clamping Range:
- Standard: 280 mm – 530 mm inner coil diameter
- Optional: Up to 650 mm inner coil diameter
- Manual Braking System: Prevents overtravel of the metal coil.
- Mobility & Stability:
- Equipped with four swivelling castors for easy transport.
- Extendable supports allow secure on-site clamping.
DECOILER AH1250K5 (ONLY MULTICUT 1250)
A decoiler designed for metal coils with a maximum weight of 5,000 kg and a maximum coil width of 1,250 mm. The decoiler features a highly durable welded frame and a mandrel with continuous adjustability on ball bearings, including centre adjustment. The clamping range accommodates inner coil diameters from 380 mm to 530 mm. A standard braking system ensures controlled metal coil movement, preventing overtravel.
DECOILER AH1500K5 (ONLY MULTICUT 1500)
A decoiler designed for metal coils with a maximum weight of 5,000 kg and a maximum coil width of 1,500 mm. The decoiler features a highly durable welded frame and a mandrel with continuous adjustability on ball bearings, including centre adjustment. The clamping range accommodates inner coil diameters from 380 mm to 530 mm. A standard braking system ensures controlled metal coil movement, preventing overtravel.
- Technical Information
-
TECHNICAL INFORMATION
SLMST MASTERCUT 1250 SLMST MASTERCUT 1500 Supply voltage 400 V / 50 Hz / 3 Ph. 400 V / 50 Hz / 3 Ph. Drive power 3.0 kW 3.0 kW Strip run-in width 200 – 1,250 mm 200 – 1,500 mm Working speed max. 22 m/min, adjustable max. 22 m/min, adjustable Length tolerance ± 0.5 mm (1,000 mm) ± 0.5 mm (1,000 mm) Number of blade pairs Default: 5
Optional up to 10 (depending on the material)Default: 5
Optional up to 10 (depending on the material)Processable materials
Sheet steel (400 N/mm²)
Stainless steel (700 N/mm²)
Copper / Zinc
Aluminiummax. 1.5 mm (5 blade pairs)
max. 1.25 mm (4 blade pairs)
max. 1.5 mm (5 blade pairs)
max. 1.5 mm (5 blade pairs)max. 1.5 mm (5 blade pairs)
max. 1.25 mm (4 blade pairs)
max. 2.0 mm (5 blade pairs)
max. 2.0 mm (5 blade pairs)Dimensions (L x W x H) 3,580 mm x 2,000 mm x 1,560 mm 3,580 mm x 2,300 mm x 1,560 mm Weight approx. 4,000 kg approx. 4,800 kg - Accessories
-
ACCESSORIES
RIGHT OPERATING SIDE SLMST MASTERCUT 1250 / 1500
Alternatively, the machine can be changed to be controlled from the right side (default operator side is left).
ADDITIONAL PAIRED BLADES
Additional cutting rings: The standard set of 4 paired blades can be extended to a max. of 10 pairs of blades (depending on material).
DOUBLE GUIDE ROLLER TO FEED THE MATERIAL GENTLY
A pair of guide rollers can be installed in front of the intake to feed material to the slitting machine. This can prevents damage to the material (e.g., bending of the strip material).
PROTECTIVE FOIL COATER SFB (NOT DRIVEN)
The protective film extention unit is designed to unwind a self-adhesive protective film while applying it to the top surface of material while being processed.
FEED TABLE (LIFTABLE)
Support table for inconvenient material. The stainless steel platform can be lifted (pneumatically with 8 bar working pressure) and is controlled by the central PLC unit of the system.
Extraction TABLE
Stainless steel table surface for receiving panels after cutting. Four heavy duty castors (two with lock breaks) ensureing high stability while manoeuvring the cut material around the workshop. Mechanic swivelling hooks are used to attach the table to the machine while magnetic safety switches verify the correct position of it.
DECOILER AH1250A1 (ONLY MULTICUT 1250)
A robust decoiler designed for metal coils with a maximum weight of 1,000 kg and a maximum coil width of 1,250 mm.
- Durable Construction: Built with a welded frame for stability.
- Adjustable Mandrel: Continuously adjustable ball-bearing-mounted mandrel with centre adjustment.
- Flexible Clamping Range:
- Standard: 280 mm – 530 mm inner coil diameter
- Optional: Up to 650 mm inner coil diameter
- Manual Braking System: Prevents overtravel of the metal coil.
- Mobility & Stability:
- Equipped with four swivelling castors for easy transport.
- Extendable supports allow secure on-site clamping.
DECOILER AH1250K5 (ONLY MULTICUT 1250)
A decoiler designed for metal coils with a maximum weight of 5,000 kg and a maximum coil width of 1,250 mm. The decoiler features a highly durable welded frame and a mandrel with continuous adjustability on ball bearings, including centre adjustment. The clamping range accommodates inner coil diameters from 380 mm to 530 mm. A standard braking system ensures controlled metal coil movement, preventing overtravel.
DECOILER AH1500K5 (ONLY MULTICUT 1500)
A decoiler designed for metal coils with a maximum weight of 5,000 kg and a maximum coil width of 1,500 mm. The decoiler features a highly durable welded frame and a mandrel with continuous adjustability on ball bearings, including centre adjustment. The clamping range accommodates inner coil diameters from 380 mm to 530 mm. A standard braking system ensures controlled metal coil movement, preventing overtravel.
MORE PRODUCTS AND SOLUTIONS
Slitting system SLMSS 1250
Our slitting line SLMST 1250 – For flexible, precise as well as burr-free cutting of wide strips
Slitting system SLMST 1250 / 1500
Our slitting line SLMST 1250 / 1500 – For flexible, precise as well as burr-free cutting of wide strips
Slitting system SLMST MASTERCUT 1250 / 1500
Our slitting line SLMST MASTERCUT 1250 / 1500 – For flexible, precise as well as burr-free cutting of wide strips