Electrohydraulic notching unit for mechanical assembly preparation of pre-profiled panels with double standing seam 25, 32 and 38 mm with and without clip relief for roofs, dormers, façades and parapets.
FEATURES
- Notching of a straight standing cutout in optionally 25, 32 and 38 mm profile height, standard or with clip relief
- Notching of parallel, tapered and trapezoidal profile panels
- Profiled sheets are cut out 90°, straight standing
- Double punching tools facilitate notchings for laying both from right to left as well as from left to right
- Panels can therefore be prepared for the eaves, building inflexion points or the upper parts
- Material thickness for non-ferrous metals up to 0.8 mm, stainless steel up to 0.5 mm and sheet steel up to 0.7 mm
VIDEO
TECHNICAL INFORMATION
| Supply voltage | 230 V / 50 Hz / 1 Ph. |
| Drive power | 1.1 kW |
| Notching depth | 15 mm – 40 mm (infinitely adjustable) |
| Processable materials | Non-ferrous-metals up to 0.8 mm Steel up to 0.7 mm Stainless steel up to 0.5 mm |
| Dimensions (L x W x H) | 970 mm x 670 mm x 1.285 mm |
| Weight | 220 kg |
- Technical Information
-
TECHNICAL INFORMATION
Supply voltage 230 V / 50 Hz / 1 Ph. Drive power 1.1 kW Notching depth 15 mm – 40 mm (infinitely adjustable) Processable materials Non-ferrous-metals up to 0.8 mm
Steel up to 0.7 mm
Stainless steel up to 0.5 mmDimensions (L x W x H) 970 mm x 670 mm x 1.285 mm Weight 220 kg
MORE PRODUCTS AND SOLUTIONS
Nochting unit KLS
Our notching unit KLS – For mechanical assembly preparation of pre-profiled panels
Notching unit EHA
Our EHA notching unit – For automated notching, driving and folding of pre-profiled panels with double lock standing seam 25, 32 and 38 mm
Bending unit UKST
Our UKST bending station – for flange mounting on profiling machines of the QUADRO series
